Create Cool, Contemporary Faux Brick Using Fusion Products

Create Cool, Contemporary Faux Brick Using Fusion Products

Recently I posted about painting our fireplace brick and mantel with Fusion Mineral Paint. It was fast, inexpensive, and provided the immediate gratification I crave! Just a bit of cleanup to begin with and I had a fresh, new look in about an hour and a half, no sealer coat required.

While I was painting, I thought about folks who do not have a brick fireplace – maybe just drywall above their mantel, or even no fireplace at all. I realized that Fusion has a wonderful option for creating the faux brick look! They offer a stencil shaped like authentic brick that can be used for painting what I call southern-traditional-style brick. You know, terra cotta and browns. Or, like my new favorite, a cool, contemporary color scheme, using soft grey and white textures.

Sadly, having been a faux finisher forever, the walls in our home are plastered, painted, and stenciled, with not an inch to add a faux brick finish. But, I went junkin’ in our own back yard, amongst Steve’s contractor left-overs and found a huge scrap of plywood to play with.

Look how clean and modern this wall I stenciled is. I accessorized simply, with a huge white platter and pops of chartreuse from the glass fish floats.

Create Cool, Contemprary Brick Using Fusion Products

Want to give this technique a try?

Here goes – you won’t believe how fast and fun this process is!

SUPPLIES

• Fusion Brick Stencil

• Fusion Mineral Paint in Sterling and Ash

Fusion Pearl Embossing Paste

Fusion Sand Stone Texture

• a rubber tool like my Color Shaper, or anything that has some give to it

• a flat palette like an old cookie sheet or piece of tempered glass, rags, paper towels, dropcloth, painters tape, ladder

BASECOAT 1 or 2 COATS OF STERLING

Create cool, contemporary faux bricks using Fusion products.

No worries about what’s underneath. This board was black, and I painted 2 coats of Sterling, then let dry.

MIX UP COLORS

Create cool, contemporary faux bricks using Fusion products.

Mix some Sterling into a container with some Sand Stone Texture – about 2 parts Sand Stone, 1 part paint. Mix a small amount of Ash into a bit of Sand Stone.

Create cool, contemporary faux bricks using Fusion products.

Put some of the colors out on your palette, plus a pile of Smooth Embossing Paste. (Pearl Embossing Paste creates a contemporary pearl finish. Sand Stone alone can be used for its gritty texture and raised detailing.)

PREP THE AREA AND POSITION YOUR STENCIL

Create cool, contemporary faux bricks using Fusion products.

You can work on the wall with this stencil, and the beauty of it is that you don’t have to wait for the products to dry before repositioning the pattern. Brilliant!

Put down your drop cloth. If you have a ladder with a tray, great. You can tape your palette on to keep your hands free. Use push pins or tape to anchor the stencil it in position. Start at the top, and work out and down from there.

LAY IN THE TEXTURES

If you have a ladder with a tray, great. You can tape your palette on to keep your hands free.

Put a lot of Pearl Embossing Paste on your tool and lay your hand at a very low angle to the surface. With no pressure at all, pull the product across the stencil. Don’t work it like a paint brush, just let the material lay where you placed it. Change the angle of the tool often.

If you have a ladder with a tray, great. You can tape your palette on to keep your hands free.

After you finish the entire stencil with Pearl, leave the stencil in position and add areas of the Sterling mix. On your palette, it almost looks white, but there is a color difference, I promise.

Then add in just a very few touches of the Ash mixture.

While you’re working you can peel up the stencil to see your progress, then lay it back down to make color adjustments. After it all dries, the colors will be a bit darker.

Create cool, contemporary faux bricks using Fusion products.

If you get some material on the Sterling grey “grout” just paint over it with a small brush.

And look!

faux_brick_Fusion_products_stencils Create Cool, Contemporary Faux Brick Using Fusion Products

The ambiance you have created is so high end, and it lends itself to accessorizing with almost anything – from modern to vintage – beautifully.

For under $100, which includes the stencil, the paint, the Sand Stone and Pearl Embossing Paste,  you can paint about 100 square feet of wall – a feature wall, several back splashes or two fireplace feature walls.

Create Cool, Contemprary Brick Using Fusion Products

Dying to get this look? Here’s where to find your local Fusion Mineral Paint retailer.

{This post is sponsored by Fusion Mineral Paint. They graciously allow me to create projects with their amazing products. The content and ideas are my own.}

 

Leave a Reply

Your email address will not be published. Required fields are marked *